Ascension Traditional Bronze Patina

This is the traditional bronze patina on the same sculpture, Ascension. Interesting how the patina can change the look of a sculpture. They are both beautiful in different ways.

In other happy news, I'm happy to say that I was again selected to show my work at the Loveland Sculpture Invitational 2012 - so time to get back in the studio, finish those two waxes and get back to sculpting!

Ascension Figurative Sculpture is at the foundry! ~Lori Kiplinger Pandy's first bronze

After some delay, my sculpture, "Ascension" has been delivered to the foundry at Art Castings of Loveland! They will be making a multi-piece mold of her. Then they will cast her in wax. Next they'll chase the wax. After that, they dip her into plaster and sand many times over a period of a week or more. Finally they'll melt the wax out of the plaster shell, then pour in the molten bronze. After the bronze cools, they'll smash off the outer shell to reveal the bronze pieces.

Finally, they'll assemble the pieces and weld her back together and chase all the seams. Last of all they'll apply the patina, giving her the final colors and attach to her stone base. Each an every bronze sculpture will require this process:  from pouring the wax to attaching the base!

She measures approximately 10" tall (without base) by 15" long and 6" wide. She will be supported only by the fabric that drapes from her hips. The fabric will pool onto the base, flow over the edge of the base and onto the table."Ascension" will be an edition of 33 plus several Artist's Proofs. Number 1 of 33 has been pre-sold already!

If you would like to see the entire actual process of developing a bronze from mold-making to final patina, you can view the short video from Art Castings here.

 The entire casting process will take about 10-12 weeks. I have to study some patina choices but I have something very specific in mind and will post that soon.

I must say that I am very excited to finally have her at the foundry. Being somewhat OCD about my work, I have a hard time letting go ;-)

But I must say, I loved, loved, loved, sculpting her! Even when a mishap came along to destroy
her hand or her face, I had just as much fun sculpting her again as I did the first time. In fact, the sculpting itself was very rewarding and relaxing. The hardest part of this sculpture was learning about armatures and the ways of working with this particular medium, Jmac Classic Clay.

I learned so much from working on this sculpture and am looking forward to using that hard-won experience on the next piece.

Once the sculpture is final, I will release the retail price along with the new photos.

Figure Sculpting Demo - young dancer in ceramic clay #7

 Making progress on the sculpt and generally pleased with her. There are some areas that need a bit more refining. The lighting is rather harsh because I just grabbed some quick pix in the studio. .

When she's fully completed I will set up the photo lights and get better photos,

I really enjoyed sculpting her and have titled this piece:

"Her  first dress rehearsal"

This was my first sculpture of a child and I have to agree with other people - kids are challenging. I did not work from a model which can add to the challenge of a piece as I try to imagine limbs in the round. The thing with children is their softness. It makes it hard to find the forms sometimes.

 This was so enjoyable that I'm certain that I'll be doing more dancers and hopefully gymnasts too.

Ceramic Sculpture turban wrapped woman

Finished sculpting "Hint of a Smile" today. This is water-based clay called Chestnut that I purchased from Mile-Hi Ceramics. It's rather groggy but that can be interesting. This one dried a little faster than I would have liked, due to my deadlines for illustrating my book - so there are a few cracks in the turban. However, that too, may end up being a desirable thing - won't know for sure until it's fired.

I will consider using some epoxy to put in the suggestion of a pupil highlight after firing also.

With the eyes hollowed out, there is additional venting for the sculpt. I'm hoping that offsets how thick the turban ended up. I did cut her in half and hollow her out but added the turban later so that part is fairly thick.
This sculpt is just under life size. I'll post again with her after firing.

Nude and Drapery Sculpture Study

This week, at the sculpture class with Andi Mascarenas at the Denver Art Student's League, we did a nude study using some drapery. I had about 3 1/2 hours with the model and then continued the work at home for another 4 hours. The drapery was challenging, as every time the model took a break the drapery was different when she came back to model. I had the usual challenge of the paper core coming through and a few places where the wall of clay was very thin. When I got the sculpt home, I endeavored the remove the paper and had quite a bit of breakage that needed repair. I think it goes to show that I'm starting with the wall of clay too thin from the start, so will try to correct that problem on the next sculpt.

Another problem that I encountered was slumping. Because we're trying to work so fast, since we have limited class and model time, there isn't enough time for the clay to firm up much before we sculpt. I found that the weight of the top part of the sculpt was causing the bottom, her legs, to smash down. In order to correct that problem, I had to add more paper and then more clay to the base in order to bring the overall height back up. Unfortunately, I also over-corrected for that slumpage and you may notice that her lower torso is elongated. The proportion of the lower torso being too long isn't terribly unpleasing, at least to me, which is surprising since I tend to be a perfectionist.

But then, that is something that I've been working to overcome and one of the main reasons that I'm taking Andi's class. Good art isn't perfect. It's beautiful or evocative, or interesting, but not really perfect. So I'm trying to force myself to produce a lot more art and to learn something from each piece and to try to find the interest or emotion, or thought for each one, instead of the exact reproduction of what is already there.