The Orator - Frederick Douglass Sculpture Portrait fired with patina

 The ceramic sculpture portrait of Frederick Douglass has been fired and it came through beautifully. The heavy, groggy clay had little shrinkage and retained it's rough and earthy qualities. I have layered different pigments for the final patina and had the photos taken.

This life-sized bust, The Orator, can be seen on my website and you can see the process of sculpting this portrait, including the original clay maquette (sketch) on this blog as well as on my website www.kiplingerpandy.com

Continuing the portrait

 Today was one of those days - modem was coughing and sputtering and finally gave up the ghost - second time in 8 months - I spent several hours trying to get a different brand but alas, this one is the only one in town for dsl.

So even though I've gone through two of these already - I had to exchange it for the same model....and know that it will probably go the same way as the first. Will be giving some serious thoughts to new ISP if this keeps up.

Anyone out there know of a truly reliable DSL that will play nice with my Airport?

I did some refining of forms, but my time was broken and that makes it less productive. Tomorrow I should get some real time into the piece and perhaps get a chance to start blocking in the clothing too.

Any guesses as to who the person his?

Finishing ceramic clay portrait of Harriet Tubman

 Harriet was very inspiring to sculpt. I took longer than I needed because I tried out different sculpting techniques from very impressionistic to fairly tight. I have to say that I really liked the looseness of the impressionistic version - so full of energy. However, as she neared completion the strength of her personality and her face competed with the strong strokes of the very loose version.

So I continued to refine until I felt that I struck a balance of free strokes and polish. The clay is a very heavy, firm, groggy clay called Chestnut that I got at Mile Hi Ceramics. It's an interesting clay to work with but the heavy grog can be a bit sandy to work with. I find that the grog (sandy, pebbly particles that add body and strength to a clay while reducing shrinkage rate when firing) comes to the surface when using sponging or brushing with water on the surface. However, if you push on the surface using wood or metal tools or pallets, the grog is pushed deeper into the clay and the surface is smooth - or at least smoother. I found this to be an interesting combination as I burnished a few areas where the skin would be most taught, giving a tighter, more light-reflective property to the clay and leaving the more textured, groggy clay for other areas. Very tacticile

This portrait bust of Harriet Tubman was very satisfying to sculpt. I plan on doing a 3/4 figure of her soon and the bust was a way of getting familiar with her face and features before expanding into more of the figure later.

She'll need to dry for a while before firing, so that won't take place until sometime in January.

Harriet Tubman Sculpture Portrait Demo

 Sorry so slow to post....this is from a week or more ago. I let the clay firm up some more and then cut off the top of Harriet Tubman's head to continue hollowing out more. The clay is quite heavy and thinner walls fire better taking some of the excessive weight out of the finished sculpture. As I sculpt and make changes, I can add on a lot of additional clay. When I feel the portrait getting heavy I know it's time to hollow again.

By lifting the sculpture up, I can feel not only the increased weight, but where the weight is. That allows me to target an area for additional hollowing, which keeps the piece centered. Something you'll want to keep in mind when the piece is fired and ready for professional mounting..

Here I am repairing the area that was sliced off to gain access to the interior for hollowing. After putting the piece back together, I carve out a section of the join, add more slip, then some fresh clay.

Harriet Tubman Ceramic Portrait Bust Demo

 Here is an update on Harriet's progress. I let her rest over the weekend after having hollowed her out. She was a bit over-dry when I checked this morning, so I've soaked some cloth to drape over the driest parts and misted well before beginning work again.

I can see I've got to work on the symmetry a bit more, but she is making progress. I intend for the surface to retain a lot of looseness and energy, so the challenge will be to bring it to a level of completion that pleases me and stopping before I overwork her. Estimated time to date: 5 hours.

Clay sculpture portrait demonstration Harrient Tubman

Making progress on Harriett Tubman bust study. This is at about the 3.5 hour mark. The clay is wet and heavy so I have sticks pushed into the heavy areas to help support while firming up. Once I'm fairly satisfied with the forms, I'll cut her up and carve out the interior to hollow out then reassemble to work on her some more.

Patinas and bases

I didn't have enough time to set up and properly photograph the sculptures on their bases with the patinas prior to taking them to the show. But I did a rough shoot within 30 minutes, so while not great photos, at least it's something. Didn't get my white balance quite right but I will try to photo them later at my leisure...

Ceramic Sculpture turban wrapped woman

Finished sculpting "Hint of a Smile" today. This is water-based clay called Chestnut that I purchased from Mile-Hi Ceramics. It's rather groggy but that can be interesting. This one dried a little faster than I would have liked, due to my deadlines for illustrating my book - so there are a few cracks in the turban. However, that too, may end up being a desirable thing - won't know for sure until it's fired.

I will consider using some epoxy to put in the suggestion of a pupil highlight after firing also.

With the eyes hollowed out, there is additional venting for the sculpt. I'm hoping that offsets how thick the turban ended up. I did cut her in half and hollow her out but added the turban later so that part is fairly thick.
This sculpt is just under life size. I'll post again with her after firing.

New terracotta clay bust in progress

 I have been swamped with designing the layout and illustrations for my newest book for Operation Outreach USA. Love illustrating for them, but wishing there were more hours in the day. Also got word that my other book, Nana's Silly Goats has been printed and is currently being shipped to the states. Nancy said it's gorgeous and I must say the color proofs we reviewed earlier looked great so I'm really looking forward to seeing them. I'll be posting some of the art on my website soon.

Currently I'm working on a new bust of an African American woman. This is sculpted in Chestnut. It's clay left over from my class with Andi Mascarenas and so was a bit stiff to work with as it's rather old. But I couldn't stand to waste the clay, so while it was quite hard, I soaked it well and let it marinate for a couple of days, then wedged it a bit to work the hard bits into the mushy bits.

This was actually started nearly 8 weeks ago and shelved when deadlines hit. When I got back to her, it had gone well past the leather hard stage, so was a challenge to get working again. I had a heck of a time cutting her in half to hollow out! Once I finally got her hollowed and put back together, I worked in her shoulders and started her scarf. These are some early photos and I should have newer ones up in the next day or two showing the progress.

Still not sure what I think of Chestnut. It's a rather stiff and very coarse clay. You can really see the grit and grog. Sometimes I like the earthiness of if it, but other times I find it distracting. I'll probably compare it with some other clays after firing. The plus-sized woman that I sculpted earlier using his clay fired nicely. It comes out a very, very dark brown color, which is interesting.