Making a silcone mold and wax pour

Another lesson learned: two right angles are difficult and time-consuming to produce in bronze.

My bronze sculpture, "Ascension"  is the woman that is rising from the base, supported by the cloth that is draping off of her hips. While I love the waterfall effect of the drapery, in reality, it causes a lot of headaches for the wax chasers, metal chasers and base makers. It also makes production more difficult, time-consuming and costly.

Additionally, the foundry mold-maker misunderstood my instructions and added wax to the back of the fabric in the mold-making process that required hours for me to remove and chase.

So, since I learned that the the two right angles are a problem and the current cloth in wax required so much time (every single time one is made!) I decided it would be best to sculpt a new section to the drapery to replace the one that they were currently using. I took the existing wax, removed the mistake in the back and designed new draping to the bottom that just clears the base. This will limit the sculpt to only one right angle (thus making production much smoother) and will also reduce the chasing done by more than 3/4 of the current time spent on this one part of the sculpture.

Once I perfected the wax fabric, I made a pour mold and then did a sample wax pouring. I was pleased that it worked well on the first try, enabling me to get the new chased wax and the new mold to the foundry so the next two in the edition can begin their process into becoming bronze #2 & #3 of 33.

Ascension Traditional Bronze Patina

This is the traditional bronze patina on the same sculpture, Ascension. Interesting how the patina can change the look of a sculpture. They are both beautiful in different ways.

In other happy news, I'm happy to say that I was again selected to show my work at the Loveland Sculpture Invitational 2012 - so time to get back in the studio, finish those two waxes and get back to sculpting!

Metal Chasing of "Ascension"

The bronze has been poured then the metal shell smashed off. After it was sandblasted to clean off any lingering particles, they take the sculpture in and begin to weld the pieces back together. Then an artisan known as a metal chaser then works on
burnishing out the weld seams and any some imperfections that they find. Marker indicates areas that they will do some additional work.

 I spent a lot of time at the Base Shop selecting the base (Nordic Green Granite) and how the sculpture will work with the base. We are going to go with a two tier base so that there will be room for the turntable (then the sculpture will rotate smoothly)

The sculpture is looking beautiful and I've mapped out my patina ideas - so once the sculpture has been custom fit to the base and the chasing done - it will be time to patina and affix to the base!

First Bronze Pouring of "Ascension"

Today was the first pouring of bronze for "Ascension"!  The shells had been built up over the hollow wax sections over a period of time. The shells were then placed into the furnace and the wax was melted out - a process referred to as "lost wax".

Next they took special buckets and collected the molten bronze and poured the liquid metal into the now-hollow ceramic shells. Once the bronze cools, they break apart the ceramic shells using hammer and pneumatic tools. After removing the hard shells, the sprues are then cut off using plasma torches.

Once that is completed, the sections of bronze are cleaned up by sand-blasting the last bits of plaster shell residue.

Finally, after the pieces are cleaned up they are ready to be welded back together.

Tomorrow I'll post photos of the sculpt being metal-chased.