Jet lag and sculptures are not a good combination...

 Bummer.....I'm seriously exhausted, having just returned from Europe and having hubby and daughter sick. I picked up my little gymnast to pack her up for the auction at the Loveland Sculpture Invitational this weekend and dropped her.

While ceramic sculptures can be quite sturdy, this was a wicked drop. I wouldn't mind so much, but I was counting on donating her for the auction and I had just put had the sculpt mounted to this nice stone base. Well, I might be able to salvage the base for future use.

At least I didn't smash any others yet ;-)

I got the rest of them down to the show and will finish the final set-up tomorrow. Then I can post some photos of the booth at the show later.

Small scale full figure gymanst in water based ceramic clay

 In order to help the clay firm up and dry out a bit - plus to make it easier for the sculpt to hold its own weight, I cut her up to hollow out more. Although I did use a small bit of newspaper to bulk out her core, I find that in sculpting and moving the position around, there areas can build up thick in some areas. Surprisingly, this one was pretty symmetrical.


I removed some more of the clay from the core and the pelvis region. Once the clay firmed up

more, I was able to reattach her and continue sculpting.

Today she was strong enough to remove from the prongs that had been supporting the weight and stand on her own. I am working on finalizing her now.

First wax pouring of miniature fox sculpture

This is my first time pouring wax in preparation for the lost wax bronze process. I have an old crockpot that I'm using to heat the wax. This wax is something I bought an embarrassingly long time ago and can't remember what kind it is. Karen, at Sculpture Depot, assured me that pretty much any wax will work and different kinds can be intermixed. I thought I'd be really smart and put the block of wax in an old metal can inside the cooker to keep the cooker from getting wax all over it. Nice idea, but it dripped and got wax it it anyway ;-)
I'm using the pour mold (commonly called a dump mold) that I made of my miniature fox (you can see on earlier posts). After melting the wax, I took a small cup, dipped it into the melted wax and poured into the mold. Then swirled the mold around and emptied the wax back into the pot. A layer of wax remained inside. I did this several times to build up layers.
1) crockpot with melted wax in can
2) wax in the mold (I tried tape to secure the mold but it didn't stick very well - rubber bands worked better)
3) the wax mold of the fox - it has flaws and the base would need to be trimmed.
4) I was anxious to see the wax and demolded too soon - the wax was still quite warm and broke.You can see how the swirling of the wax creates a hollow casting.
5) I figured it would take several tries to learn the process enough to get good results. Luckily I can simply melt down the rejects to reuse the wax.
6) Back into the pot for remelting. I tried again that night - but the wax wasn't hot enough so it was a tad lumpy. The results were another imperfect casting so will try again later.

Miniature Fox Sculpture with New Patina

I wasn't satisfied with the first casting and patina of my miniature fox sculpture, so try, try again. This one came out much more to my liking and I earned a good lesson: solid colors show texture and form much better than variegated colors. Especially in such small scale (about 3"). I have a base that I'm preparing so when it's dry we'll see how it looks on a solid wood base.

My next endeavor will be to cast this fox in wax and chase it. I have an appointment with Art Casting Foundry in Loveland, where I'll be having this little guy bronzed!

I'm quite excited about that - I sculpted him with mold-making and bronzing in mind as I want to learn both processes.

Since this patina came out much better, it gave me the urge to work on some of my other sculptures. There were two in particular that I didn't care for how the original patina came out. Since I wasn't happy with the over all look, I decided that I could risk ruining them further by removing the patina and trying a different. It was a good choice - and I will post new photos of them soon.

Lastly, I've been struggling with my photography. On a shoe-string budget, I've been trying to outfit my photo area and have been making loads of test photos. Thank goodness for digital! Back in the day you could photo for a show, send the film off and not find out till a week later that they were awful! But now - Bam! upload the photos and see how bad they are instantly! ;-) Actually, I made real progress this week in getting white balance and lighting to agree - so new photos will be up soon!

Miniature Fox Sculpture in Oil Based Clay

 I need to start learning the mold-making process, so I sculpted a small image of a fox in oil-based clay. I chose the animal and the pose to make for as easy of a mold as possible - notice that the entire composition is very pyramid in shape. I made a simple armature of a nail driven into a small wooden disc. Then I used oil-based clay to sculpt the fox in a more stylized manner.

It was fun to sculpt something different from figure and interesting to try and capture the essence of a fox without worry of trying to be anatomically correct. The oil-based clay is still kind of new to me and the sticky texture is still something that I'm getting used to. The upside is that you can stop and start as many time as you wish and it never dries out like water-based clay.

This measures 3.5" tall and is sculpted in Classic Clay purchased from Sculpture Depot.  Next I'll be showing the process that I used to make a pour mold of this sculpt. I learned this technique in the sculpting class that I took with Rik Sargent at the Denver Art Students League.