Enlarging the clay maquette

A few weeks ago I sculpted a small maquette (clay sketch) that was inspired by my daughter. She's never, I mean never, without a book. She reads constantly and often absently fiddles with her necklace while absorbed. The sketch was originally titled "The Pageturner".

I have have decided to rename the piece "A Good Read" instead and do a similar piece featuring a boy and used "The Pageturner" for that one instead. I'm looking forward to that one, but for now I have decided to enlarge this one.

While I plan to cast the maquette as a small bronze edition and perhaps in resin later on, I also wanted to work larger for a change. I could make my own armature, like I did for the maquette, but I have been wanting to try the Truform armature, so I picked one up at Sculpture Depot and got started on working at 1/2 life size.

The Truform armature is very lightweight and the hard foam has good 'tooth' to grab the clay. I warmed the Jmac in my elcheapo hotbox and started working. Here you can see the original maquette and the first stages of laying on the clay. I'll post photos throughout the process to show the progress.

Beginning State of Grace final

     Starting the final clay for "State of Grace". This time I'm using Jmac Classic clay - medium for the body and firm for the head and hands. I did the maquette a while ago and now that I've finished a few things, it's time to start this one. I'm using the 1/4 scale (16") Truform armature for the first time. So far it's going pretty well. It's nice to have the hips and torso blocked in with the Truform, but I did find I had a few problems with the placement of the support bar. After working on it for a while, the weight of the clay pulled down on the lower part of the body and elongated it out of proportions.

Using my calipers, I was able to tell it was quite distorted, with the upper torso much too long. The weight have pulled down on the wire spine.

So I cut her up and removed her, shortened the spine wire in the torso and re-bolted her back into place. Hopefully I have it tight enough now that this won't repeat.

Because she's floating the weight is more of a factor - if she where standing and supporting her weight it wouldn't happen as much. But I won't be sculpting the fabric support until later. You can look back into earlier posts to see the maquette that I'm working from.

I'll be taking time on Friday and Monday to chase the waxes for my bronze Harriet Tubman and Waiting on the #9 - then back to working on this pose on Tuesday.

Refining the clay sketch maquette "State of Grace"

 I spent a little time refining the forms and attitude for this clay sketch. It is next in the series that I'm doing of rising women. The first, "Ascension" is nearly finished in bronze and releasing very soon. This sketch in clay is a study for the next to go to bronze. The simple armature is 12" - about the same size as "Ascension". The final for this sculpt will be 18" using the smallest of the TruForm armatures.

Overall, I'm pleased with the direction that this is taking, but will change the hair and cloth a bit on the final. I'll be taking this sketch down to Art Castings to have them look her over for any casting problems before I start the final. I'll also take the sketch into the Base shop to get some ideas before I go to sculpt that may change the fabric and the overall height. Once I've had a chance to discuss this piece with my bronze team, I can begin working on the final clay to size.

This piece will be titled "State of Grace". 12" armature - but with hair and cloth she is currently 18" tall.