Ecorche - anatomy study of muscles in clay

 I'm continuing with my self-study, refresher of anatomy. This 1/2 life sized sculpture is being created by layering on the clay as muscles. As I work on the piece, I'm considering the role of the muscle - how round or flat is it? What is the function of the muscle and how does it effect the surface shapes when flexed?

Yes, this is a tedious exercise - and well worth every minute. It's so tempting to stop and go to surface forms, but that would defeat the purpose. Forcing yourself to really place the muscle, with it's origins and insertions, leads to greater understanding of the body....and understanding the body frees you to sculpt with confidence.


Jmac classic clay medium.

Correcting facial proportions in clay

 I'm back in my studio now and working on "A Good Read". Still blocking in the basic musculature and forms. While working, I could see that the lips were too close to the nose, giving too much chin to the face. So I have shown how to fix this problem.

First I took my sharp metal shaper and cut upwards towards the nose to cut the lips off. Then I removed the lips. Next I replaced the lips onto the sculpt only slightly lower.

After the lips are in place, I rolled out a small coil of clay and placed it above the upper lip to fill in the crack. Then I continued sculpting and adding more forms to the clay.

You can see that everything is very rough and that I am not concentrating on any one area. As I work on the piece I'm constantly moving around the and working front, back, side and adding clay as I go to keep the piece moving along.

Enlarging the clay maquette

A few weeks ago I sculpted a small maquette (clay sketch) that was inspired by my daughter. She's never, I mean never, without a book. She reads constantly and often absently fiddles with her necklace while absorbed. The sketch was originally titled "The Pageturner".

I have have decided to rename the piece "A Good Read" instead and do a similar piece featuring a boy and used "The Pageturner" for that one instead. I'm looking forward to that one, but for now I have decided to enlarge this one.

While I plan to cast the maquette as a small bronze edition and perhaps in resin later on, I also wanted to work larger for a change. I could make my own armature, like I did for the maquette, but I have been wanting to try the Truform armature, so I picked one up at Sculpture Depot and got started on working at 1/2 life size.

The Truform armature is very lightweight and the hard foam has good 'tooth' to grab the clay. I warmed the Jmac in my elcheapo hotbox and started working. Here you can see the original maquette and the first stages of laying on the clay. I'll post photos throughout the process to show the progress.