Monday, October 17, 2011

Ascension Figurative Sculpture is at the foundry! ~Lori Kiplinger Pandy's first bronze

After some delay, my sculpture, "Ascension" has been delivered to the foundry at Art Castings of Loveland! They will be making a multi-piece mold of her. Then they will cast her in wax. Next they'll chase the wax. After that, they dip her into plaster and sand many times over a period of a week or more. Finally they'll melt the wax out of the plaster shell, then pour in the molten bronze. After the bronze cools, they'll smash off the outer shell to reveal the bronze pieces.

Finally, they'll assemble the pieces and weld her back together and chase all the seams. Last of all they'll apply the patina, giving her the final colors and attach to her stone base. Each an every bronze sculpture will require this process:  from pouring the wax to attaching the base!

She measures approximately 10" tall (without base) by 15" long and 6" wide. She will be supported only by the fabric that drapes from her hips. The fabric will pool onto the base, flow over the edge of the base and onto the table."Ascension" will be an edition of 33 plus several Artist's Proofs. Number 1 of 33 has been pre-sold already!

If you would like to see the entire actual process of developing a bronze from mold-making to final patina, you can view the short video from Art Castings here.

 The entire casting process will take about 10-12 weeks. I have to study some patina choices but I have something very specific in mind and will post that soon.

I must say that I am very excited to finally have her at the foundry. Being somewhat OCD about my work, I have a hard time letting go ;-)

But I must say, I loved, loved, loved, sculpting her! Even when a mishap came along to destroy
her hand or her face, I had just as much fun sculpting her again as I did the first time. In fact, the sculpting itself was very rewarding and relaxing. The hardest part of this sculpture was learning about armatures and the ways of working with this particular medium, Jmac Classic Clay.

I learned so much from working on this sculpture and am looking forward to using that hard-won experience on the next piece.

Once the sculpture is final, I will release the retail price along with the new photos.

5 comments:

  1. Great work - I like this subject matter a lot, i.e., figurative art.

    ReplyDelete
  2. Awesome!! there is a smooth flow in ur way of work..

    ReplyDelete
  3. Thank you Dario T. W. and Sai kiran Anasingaraju....I will follow up with the foundry and post the progress.

    ReplyDelete
  4. Fabulous work, Lori....beautiful idea and exquisite execution, bravo!

    ReplyDelete