Wax off to foundry for bronze

Murphy's Law strikes again. When I started "Loss" (working title) in waterbased clay over an armature I was planning on sculpting quickly and getting her to the moldmaker quickly before the clay dried. Then my publisher called with illustration work and deadline after deadline meant that the clay sat for long periods without work and parts dried and cracked before I could get her to the moldmaker.

Consequently, the mold isn't the best and required copious amount of sculpting in wax to repair. Naturally that is when my thermostat regulator that I use to dial down the heat (on my wood-burning tool that I use for wax chasing) died.

That meant that the tool now had two settings: Off and Vaporize. I do mean *POOF!* - touch that hot tip to wax and it disappears into a noxious cloud. So I spent many hours warming metal tools against the hot tool and then trying to sculpt the wax. Not the best system, but what I had available.

So - the chased wax has been delivered to the foundry and appointments set for the Metal Chaser and Patina Artist to follow - next up is taking he base template into the base shop to have the cut while I'm waiting for the bronze to be made.

Refining the emotion of Loss

 Deadlines, deadlines, deadlines. Haven't been able to post as regularly as I'd like. So - back to the sculpt of "Loss". I did some extra work and ultimately wasn't needed and wasn't diligent enough of photo. For instance I fully sculpted both ears - which are completely covered by the blowing hair. But sometimes you change direction with work and the ears may have shown - at the very least they are a form that takes up space under the hair, so their presence is still felt.

I also sculpted the hands and arms several times - trying to get just the right pose. The tendrils of blowing hair are tricky - casting shadows upon the face, which is fine with me, however may be a problem in casting in bronze - I'll be checking with the foundry. The costs of casting increase dramatically with extra work, so it's a delicate balance.

You'll see in the full length images that she is standing on a long base, which is her shadow. This is how the emotion of loss feels to me - engulfing and swallowing (shown by the hair and dress swirling about her) with nothing but darkness ahead - represented by the long shadow.

The shadow has a hole it in - the feeling of a hole in your heart.

Now that the forms are in place and proportions set  I will take some time to refine the entire piece and then take some photos with better lighting.

15" high by 16" long in waterbased clay.

Building up the form of the figure

I'm continuing to build up the forms in this water-based clay sculpture that is based off of my tiny maquette, "Loss". I cut off the arms and removed the wire armature as they were drying out too quickly - that then started to place the arm shapes back into place with toothpicks to bolster them until the clay firms up a bit. 

The clay is old and isn't the best to work with. Seems like I buy clay - then another deadline hits and I store it too long - and it loosed the placsticity a bit. Nevertheless, I will continue to refine the sculpture and add the hands next. On a different note, I've been accepted to the Loveland Sculpture Invitational again this year and will be working hard to have new works for the show in August!