Wax off to foundry for bronze

Murphy's Law strikes again. When I started "Loss" (working title) in waterbased clay over an armature I was planning on sculpting quickly and getting her to the moldmaker quickly before the clay dried. Then my publisher called with illustration work and deadline after deadline meant that the clay sat for long periods without work and parts dried and cracked before I could get her to the moldmaker.

Consequently, the mold isn't the best and required copious amount of sculpting in wax to repair. Naturally that is when my thermostat regulator that I use to dial down the heat (on my wood-burning tool that I use for wax chasing) died.

That meant that the tool now had two settings: Off and Vaporize. I do mean *POOF!* - touch that hot tip to wax and it disappears into a noxious cloud. So I spent many hours warming metal tools against the hot tool and then trying to sculpt the wax. Not the best system, but what I had available.

So - the chased wax has been delivered to the foundry and appointments set for the Metal Chaser and Patina Artist to follow - next up is taking he base template into the base shop to have the cut while I'm waiting for the bronze to be made.

Beginning a new figure sculpture - "Loss"

Taking a break from the ecorche piece and trying something a bit different. I am sculpting from a tiny, quick maquette that I made a couple of months ago depicting the emotion of "loss". The was before the indescribable day of Sandy Hook....but since then this sculpt has prayed on my mind. So I decided to table my work for the moment to give some attention to this.

Usually I work in either water based clay for firing or oil-based clay for mold-making and then bronze. But for this piece, I'm working with a metal armature like I would with oil-based clay, but I'm sculpting with water-based clay instead. I just really love the feel of waterbased clay and wanted to give this a go.

The tiny sketch is a oil-based clay and the enlargement that I started is a metal armature with water-based clay on it. It can't be fired -as you can't dry and fire waterbased clay with a metal armature in it. In fact, I really can't let it dry out at all, because the clay with shrink and crack and become terribly brittle. What I plan to do is have the mold-maker take a mold directly from the leather-hard clay before it dries. Then cast in bronze.


I've  not done this before - my bust of Harriet Tubman was a fired clay piece, so not fragile when making the mold. But it's good to experiment.

"Loss" as I'm doing her now stands about 15" tall and has a long shadow being cast before her - symbolic of the darkness that she's feeling. I've blocked in some of the basic forms and shapes of the anatomy and look forward to beginning the refining stage next.