Life sized clay study of Least Bittern Bird

This is a life-sized clay study that I started at Sandy Scott's bird workshop at the Scottdale Artists School.

Sandy and the rest of the class were workin on an Arctic Tern but I chose to go with a closed-wing sculpture as I was going to be taking this back to my studio for further work and needed to be able to easily dismantle from the board and armature and box up as carry-on for my flight back to Colorado. Working with a pose like this made it possible to transport rather easily with minimal damage.

I also chose this bird as it is a wader and I had some ideas for placing it within reeds and wanted to work out my own ideas for casting and basing.

This sculpture measures about 12.5" tip to tail and 5.5 wide and is sculpted in Chavant's Le Beau Touche oil based clay.

Finishing "Waiting on the #9"

Sorry for the poor photos - I was rushed and simply threw a spotlight on this and grabbed some shots before the sculpt went out to the mold-maker this morning. I had a bad sculpting day earlier this week and over-worked the piece. It went from nice and fresh to stilted and posed. Part of if was the softness of the clay for such a small sculpt and part of it was me rushing because time was running out to get this into bronze in time for the show.

I also noticed that as I overworked, I ended up pressing on her neck a bit, causing it to shorten and thicken. So I cut off her head and neck and sculpted a new one. This time, I added flowing hair to add to the breeze that was ruffling her dress. You'll notice that her hand and purse are a different color. I used Jmac Classic clay for the purse, as it is a harder clay for the tiny detail. Then, since the fingers were too soft to hold their own form with the Chavant, I added 1/2 Classic to the Chavant and mixed together. I could have used straight Classic, but was concerned that the difference in clay would impact the surface of the clay and not hold the marks the same way - to be safe, the mixing of the two clays gave a better transition from the arm to the hand. There is armature wire (22 gage braided) that is poked through her index finger to give enough strength for holding the purse and also in the blowing sections of hair.

This sculpt was a big learning process and I struggled a lot with it - which is good - from adversity comes improvement. I learned that every clay has its own strengths and weaknesses and it's very important to choose the right clay for the scale and style of subject. As I stated before, on a larger scale piece I think I would enjoy the soft, buttery feel of the Chavant Le Beau Touche a great deal - it would be easy on the hands and effortless to apply - it just wasn't the right clay for a full sized sculpt with a 1.5" face ;-) I also learned that it would be a good idea to bolt the armature wire of the feet to the board to stop any lateral motion or shifting, which causes cracks in the ankles and also can lead to minute twisting that you don't notice till later.

I enjoyed this sculpt - even the several times that I had to rip off and re-do sections and I liked the attitude and pose. This is one that I may come back to and enlarge to a bigger scale for bronze at some point. For now - it is off to the mold-maker who will chop her up and make the mold and pour the wax - until then - time to clean the studio and get the next piece started...

Refining the pose

 I've been a bit preoccupied with the High Park Fire near here. It's been very smokey and some of our friends were evacuated. The fire is over 50,000 acres but the firefighters have been amazing and we're at 15% containment - if we could get some rain and a break from the winds....

We've spent the past two years renovating a little log cabin by the Poudre river in the mountains. We only just got the new well, pump and bathroom installed, not to mention all the work re-chinking and a huge amount of overall repair. Hoping it survives this fire.

So - on to work. Have I mentioned I'm not in love with this clay? Chavant makes wonderful products and Le Beau Touche is one of them - however it takes the right clay for the right job and my opinion is that this clay is wonderful for larger scale works. At 1/5 scale its too soft and creamy but I can see how those attributes would be delightful at a larger scale and much easier on the hands. I'm sure that I'll enjoy using it again when I work larger. For now, just trying not to squoosh all the hard work.

I've been refining all the areas that I had to recreate after the shipping disaster. You can see that I have taken her hand off to sculpt separately. I added a bit of wax to the clay to resculpt the hand to make it a bit firmer. Still working out some issues on the dress wrinkles and need to get her other sandal sculpted again. Have fallen way behind. My original goal was to have this finished and in bronze for the Loveland Sculpture Invitational, however with the major setback of having the resculpt without the model, well, that's simply not going to happen. Moldmaking takes several weeks and bronze another 10-12 weeks. How disappointing.