Tuesday, February 21, 2012

Hot Patina on Bronze Ascension

 Nearing the end of the bronze process. The final chased bronze sculpture was attached to a temporary base and washed wshed in a mixture of Potash Sulphurated (also known as Liver of Sulphur).
Then the whole thing was heated in an oven for 20 minutes. Next the patina artist, Chad, layered titanium while and other earth colors and blazed it with a torch.
Once the metal has cooled, it will be sealed with laquer and waxed an attached to the final base made of Nordic Green Granite.I should have photos of the final bronze sculpture soon!


Sunday, February 5, 2012

Refining the clay sketch maquette "State of Grace"

 I spent a little time refining the forms and attitude for this clay sketch. It is next in the series that I'm doing of rising women. The first, "Ascension" is nearly finished in bronze and releasing very soon. This sketch in clay is a study for the next to go to bronze. The simple armature is 12" - about the same size as "Ascension". The final for this sculpt will be 18" using the smallest of the TruForm armatures.

Overall, I'm pleased with the direction that this is taking, but will change the hair and cloth a bit on the final. I'll be taking this sketch down to Art Castings to have them look her over for any casting problems before I start the final. I'll also take the sketch into the Base shop to get some ideas before I go to sculpt that may change the fabric and the overall height. Once I've had a chance to discuss this piece with my bronze team, I can begin working on the final clay to size.

This piece will be titled "State of Grace". 12" armature - but with hair and cloth she is currently 18" tall.

Thursday, January 26, 2012

Metal Chasing of "Ascension"


The bronze has been poured then the metal shell smashed off. After it was sandblasted to clean off any lingering particles, they take the sculpture in and begin to weld the pieces back together. Then an artisan known as a metal chaser then works on
burnishing out the weld seams and any some imperfections that they find. Marker indicates areas that they will do some additional work.

 I spent a lot of time at the Base Shop selecting the base (Nordic Green Granite) and how the sculpture will work with the base. We are going to go with a two tier base so that there will be room for the turntable (then the sculpture will rotate smoothly)

The sculpture is looking beautiful and I've mapped out my patina ideas - so once the sculpture has been custom fit to the base and the chasing done - it will be time to patina and affix to the base!

Tuesday, January 24, 2012

First Bronze Pouring of "Ascension"


Today was the first pouring of bronze for "Ascension"!  The shells had been built up over the hollow wax sections over a period of time. The shells were then placed into the furnace and the wax was melted out - a process referred to as "lost wax".

Next they took special buckets and collected the molten bronze and poured the liquid metal into the now-hollow ceramic shells. Once the bronze cools, they break apart the ceramic shells using hammer and pneumatic tools. After removing the hard shells, the sprues are then cut off using plasma torches.

Once that is completed, the sections of bronze are cleaned up by sand-blasting the last bits of plaster shell residue.

Finally, after the pieces are cleaned up they are ready to be welded back together.

Tomorrow I'll post photos of the sculpt being metal-chased.

Thursday, January 19, 2012

Refining clay sketch maquette

I got a little more work in on the clay sketch - refining shapes and forms a bit. This is Chavant's LeBeau Touche' HM (High Melt) plastelina oil based clay. As it's softer than my J-Mac Extra Firm, it's proving to be much easier to work quickly and the softness of the clay (when warmed under a light) makes it much more malleable. I originally started working with Chavant High Melt nearly 20 years ago when we lived in Sarasota and Placida Florida. At that time I was doing a lot of bas relief sculptures for Image Creations of Florida and found that the HM was the safest clay for me to use in my studio and then transport in the high Florida heat to my client's offices nearly 2 hours hot drive from my studio. Other clays would sometimes literally melt in my car during the commute.

So if you work in a high temperature climate I would highly recommend Chavant's HM (High Melt) clays for your use.

Tuesday, January 17, 2012

Maquette - clay sketch for next scuplture



While I have my 18" Truform armature set up and ready to go, I'm still working out the pose in my head. I decided that some sketching was in order but instead of breaking out the sketchbook, this time I decided to sketch in clay to work out some of the mechanics before I go to finish.


Anyone who know me know that I am an unlikely mix of spontaneous impatience (I want to get started NOW!) and relentless perfectionism (it must be as good as in my mind - no better, Better, BETTER!)


That can make for some frustrating work habits. So I'm killing two birds with one stone - starting work NOW and accepting that it can't be perfect because it's only the maquette (small clay sketch).


I am using an inexpensive 12" wire armature and some old Chavant LeBeauTouche HM plasteline. While this plasteline is perfectly fine, I do like Jmac quite a bit too. Since the LeBeau is softer than my extra firm Jmac, I though it was a good choice for clay sketching - it is quicker to warm up to workable consistency and softer/easier for my hands to manipulate, facilitating a faster, looser approach. Hopefully that will lend more life movement to the sketch and yet make it easier for me to stop at a less-than-finished state and then move on to my 18" final model, using the sketch as my reference.

Monday, January 16, 2012

Preparing board and Truform armature

 Time to get my new armature ready. I went to the hardware store and got my flange screws. After deciding the placement for the armature, I marked the board, pre-dilled the four holes, then screwed the metal flange in place.

Next I attached the metal armature rod from my 18"Truform armature. I bought this a while back, but have been busy working on other projects and haven't had the chance to try this.  The head is removable but the rest of the armature is not. In the larger sizes, you can take off the arms and legs, allowing you easier access to work on the sculpt - a real plus in certain poses.

I do know it was very tricky trying to get to certain areas with my "Ascension" so it would be beneficial to be able to take the arms and legs off of this armature. Since that isn't an option on this size of armature, I've been experimenting with creating my own system for making the extremities removable. So far 3 of my four designs failed, but the 4th is showing some promise, so I will do further experiments before starting this sculpt.

This will be a new experience for me, as I made my own armature using multiple aluminum wire for "Ascension".

Also, as I had some difficulties with the hands getting bumped, I'm building some wire armature hands to put on this piece, which may be very helpful or just a big pain in the butt - time will tell.


Thursday, January 12, 2012

Getting Jmac clay ready for next sculpt





Time to prepare for my next sculpt. This one will be done in similar style and fashion as "Ascension", however I'm trying out a new armature, which I'll be showing later.

I spent a week purging my studio of past projects and art supplies that I'm no longer using. The local people on Craigslist are very pleased about that ;-) Still needing to improving my lighting for sculpting, as it's imperative to have good, strong directional lighting to cast shadows on the sculpt to reveal the forms. As I do most of my sculpting standing - or even standing on a stool for added height, I need a light that I can move around as needed - plus my ceiling is rather low (basement studio) so I don't have a lot of hanging options. I'm thinking of getting a boom for photo lighting and clipping a light onto that. It would be useful for lighting and photographing the sculptures later too.

Time to get my materials ready to work. Every artist has their own methods of working. David Lemon (check out this guy's blog - it's delightful to watch him work and his sculpts are crazy good) likes to chunk his clay into pieces using a knife. I suspect he's bigger and stronger than I am, plus my Jmac clay is extra firm. I think it's left over from when I was living in Florida and needed something that would say firm even in high heat.  I can't possible cut through it. This may be way firmer than I will like working in for a figure, but want to try and use it up before purchasing another block in a less firm formula. So instead of trying to cut pieces off the block, I place a lamp on it to warm and then shave pieces off and collect them into a foil lined box. This box has a lid (great for keeping out dust and hair) and the foil helps hold and reflect the heat from the lamp to warm the clay. The small strips warm up very quickly compared to larger sections. I can then easily mush the strips together into manageable lumps for easy grabbing later as I'm sculpting.


Time consuming and a bit hard on the hand, but will make the actual sculpting process much smoother so worth the time and effort now.

Wednesday, January 11, 2012

Attaching wax sprues & making ceramic shell



Jeanne from Art Castings foundry let me know that the sprues were being added to my wax Ascension today. So I grabbed my camera and drove down through the snow to get some shots of the process. Wendy was working on the piece as I walked into the sprue room. She showed me how she evaluates each section to envision how the bronze will flow into the cavity left by the wax, then creates different sized channels out of wax (sprues) to act as the funnel for the bronze to pour down.

It's amazing how much work and time goes into the creation of each and every bronze. This whole process is created for every one in an edition and also means that no two bronzes are 100% identical.

Once all the wax spruces are in place, Wendy adds a pipe to the bottom of the pour cup and takes to the slurry room and places them on tall poles called 'trees'.

Next John will take each wax section and dip it into a slurry mixture, let it drain a bit then take it to a sand box and shake silica over it. The slurry and silica are built up layer, by layer over a period of 1-2 weeks, creating a hard shell encasing the wax. They are placed on the trees to dry and harden.

Once the shell is complete, it's off to the furnace to burn out all the wax and pour the molten bronze.

Friday, December 23, 2011

Wax Chasing & Lessons learned


I worked on the first two wax castings of "Ascension". The folks at Art Castings were very helpful and Mac did some good work on the chasing. However, he was working blind, as he got her in pieces and had no real idea how she went together. Can't imagine doing that! So I learned that it's a good idea to provide a series of photos for them to work from.

Another issue was that there was some confusion over how the bronze was to be mounted onto the base. Since they didn't have a photo, they thought it was one way and realized that there wouldn't be enough metal to support the floating woman.  In reality, there was, mounted the way I had planned. So I had to go back and carve out all the wax that they had added.

Never worked with wax before so after a few hours at the foundry, I decided to pack her up and take back to my studio, since it was taking longer than I thought. You can see my desk with the various tools. The hot tool that is plugged in on my desk proved much too hot to use on the sculpt much. It vaporized the wax and melted much too aggressively to be much use to me. So I kept it on and placed my metal tools on the hot tool to heat the metal carving tools. That worked much better, overall.

It still took many hours, but that is mainly due to my inexperience and I'm sure it will go much faster next time. I may even chase the entire wax next time to gain even more understanding of the practice and to familiarize myself with what casts easily or harder to incorporate into my next sculpt. After finishing her up I took her back to Art Castings. Luckily for me, Jeanne too a look at the photoshopped image I had made explaining the mounting process - she didn't think it would work - that the stone would chip!

So I buzzed over to the Base Shop and spoke with Brian. Thanks to Brian and Jeanne, we were able to come up with a solution that will enable me to mount the sculpture as I had planned, with a bit of extra effort, and another lesson learned!


Friday, December 16, 2011

Finishing ceramic clay portrait of Harriet Tubman

 Harriet was very inspiring to sculpt. I took longer than I needed because I tried out different sculpting techniques from very impressionistic to fairly tight. I have to say that I really liked the looseness of the impressionistic version - so full of energy. However, as she neared completion the strength of her personality and her face competed with the strong strokes of the very loose version.

So I continued to refine until I felt that I struck a balance of free strokes and polish. The clay is a very heavy, firm, groggy clay called Chestnut that I got at Mile Hi Ceramics. It's an interesting clay to work with but the heavy grog can be a bit sandy to work with. I find that the grog (sandy, pebbly particles that add body and strength to a clay while reducing shrinkage rate when firing) comes to the surface when using sponging or brushing with water on the surface. However, if you push on the surface using wood or metal tools or pallets, the grog is pushed deeper into the clay and the surface is smooth - or at least smoother. I found this to be an interesting combination as I burnished a few areas where the skin would be most taught, giving a tighter, more light-reflective property to the clay and leaving the more textured, groggy clay for other areas. Very tacticile

This portrait bust of Harriet Tubman was very satisfying to sculpt. I plan on doing a 3/4 figure of her soon and the bust was a way of getting familiar with her face and features before expanding into more of the figure later.

She'll need to dry for a while before firing, so that won't take place until sometime in January.


Tuesday, December 13, 2011

Wax pour for "Ascension" Bronze casting



It was quite foggy this morning and I nearly postponed my drive down to Art Castings in Loveland. But, since I'd already filled my travel mug with hot tea and charged up my camera, I decided not to wait and I'm quite glad!

When Jeanne greeted me, she knew just where my work, "Ascension", was in the maze of other sculptor's molds and waxes. They had just poured the first two waxes and Mac was starting to chase them.

In the montage photo:

1) collection of rubber molds inside the mother-mold

2) the mother mold encasing the rubber like a clamshell

3) you can see that the rubber comes out of the shell

4) the mother mold seams together tightly

5) hole where the wax is poured in

Here are some photos of the hollow wax that was poured. Mac is working on taking out imperfections in the wax. He will also fix where the armture came through. When he reaches a certain point in the process, they will call me and I will head down to spend the day doing finish chasing and detailing until I am satisfied before preparing the wax for the bronzing process.




You can see the whole process of making a bronze at the Art Castings site http://artcastings.com/casting-process.htmlhttp://artcastings.com/casting-process.html






Thursday, December 1, 2011

Harriet Tubman Sculpture Portrait Demo

 Sorry so slow to post....this is from a week or more ago. I let the clay firm up some more and then cut off the top of Harriet Tubman's head to continue hollowing out more. The clay is quite heavy and thinner walls fire better taking some of the excessive weight out of the finished sculpture. As I sculpt and make changes, I can add on a lot of additional clay. When I feel the portrait getting heavy I know it's time to hollow again.

By lifting the sculpture up, I can feel not only the increased weight, but where the weight is. That allows me to target an area for additional hollowing, which keeps the piece centered. Something you'll want to keep in mind when the piece is fired and ready for professional mounting..

Here I am repairing the area that was sliced off to gain access to the interior for hollowing. After putting the piece back together, I carve out a section of the join, add more slip, then some fresh clay.

Monday, November 7, 2011

Harriet Tubman Ceramic Portrait Bust Demo

 Here is an update on Harriet's progress. I let her rest over the weekend after having hollowed her out. She was a bit over-dry when I checked this morning, so I've soaked some cloth to drape over the driest parts and misted well before beginning work again.

I can see I've got to work on the symmetry a bit more, but she is making progress. I intend for the surface to retain a lot of looseness and energy, so the challenge will be to bring it to a level of completion that pleases me and stopping before I overwork her. Estimated time to date: 5 hours.

Thursday, November 3, 2011

Hollowing out a ceramci portrait bust

 One of the things that must happen when working in ceramic, or water-based clay, is that the piece must be hollow before firing. I find that many times when I'm working on a piece, the clay tends to shift or perhaps I change the angle of the neck or something to create more tension or drama.

The results are that the piece can become very thick in some areas and fragile and thin in others. This was the case with my Harriet Tubman bust. The addition of all the clay to the back of her head holding her scarf was pulling on the sculpt and I was supporting it with wood while it stiffened up.

At the same time, the neck area near the clavicle was quite thin.

So, although this piece wasn't at the leather-hard stage, I decided to do a preliminary hollowing early. The clay is still very soft and wet, so very easily distorted. First, I took my wire tool and cult through the sculpt. Then I removed the newspaper that I already
had in there.It was easy to see just how thin parts of the neck here - it was clear that it would have been fragile to continue to sculpt. After I separated the two halves, I lead them on foam covered with plastic to cushion it pieces. Next, I used a wire loop and tool and carved out the excess clay. Thin areas, I built back up to make stronger.

Finally, I took a fork and poked holes throughout both halves, to reduce the change for air pockets and to facilitate even drying. Then scored both edges, added slip and filled the head cavity with shredded paper and reassembled the two pieces. I added the paper into the head because the sculpt is still quite wet and will be prone to distortion. I can remove it later through the opening at the bottom of the neck. After the clay rests a bit, I will continue with the sculpting.

Monday, October 31, 2011

Clay sculpture portrait demonstration Harrient Tubman


Making progress on Harriett Tubman bust study. This is at about the 3.5 hour mark. The clay is wet and heavy so I have sticks pushed into the heavy areas to help support while firming up. Once I'm fairly satisfied with the forms, I'll cut her up and carve out the interior to hollow out then reassemble to work on her some more.


Monday, October 17, 2011

Ascension Figurative Sculpture is at the foundry! ~Lori Kiplinger Pandy's first bronze

After some delay, my sculpture, "Ascension" has been delivered to the foundry at Art Castings of Loveland! They will be making a multi-piece mold of her. Then they will cast her in wax. Next they'll chase the wax. After that, they dip her into plaster and sand many times over a period of a week or more. Finally they'll melt the wax out of the plaster shell, then pour in the molten bronze. After the bronze cools, they'll smash off the outer shell to reveal the bronze pieces.

Finally, they'll assemble the pieces and weld her back together and chase all the seams. Last of all they'll apply the patina, giving her the final colors and attach to her stone base. Each an every bronze sculpture will require this process:  from pouring the wax to attaching the base!

She measures approximately 10" tall (without base) by 15" long and 6" wide. She will be supported only by the fabric that drapes from her hips. The fabric will pool onto the base, flow over the edge of the base and onto the table."Ascension" will be an edition of 33 plus several Artist's Proofs. Number 1 of 33 has been pre-sold already!

If you would like to see the entire actual process of developing a bronze from mold-making to final patina, you can view the short video from Art Castings here.

 The entire casting process will take about 10-12 weeks. I have to study some patina choices but I have something very specific in mind and will post that soon.

I must say that I am very excited to finally have her at the foundry. Being somewhat OCD about my work, I have a hard time letting go ;-)

But I must say, I loved, loved, loved, sculpting her! Even when a mishap came along to destroy
her hand or her face, I had just as much fun sculpting her again as I did the first time. In fact, the sculpting itself was very rewarding and relaxing. The hardest part of this sculpture was learning about armatures and the ways of working with this particular medium, Jmac Classic Clay.

I learned so much from working on this sculpture and am looking forward to using that hard-won experience on the next piece.

Once the sculpture is final, I will release the retail price along with the new photos.

Wednesday, October 5, 2011

Juried into the Women Artists of the West

When you're in your studio, trying to keep up with deadlines, it's easy to let tasks slide. One of my goals this year was to join more professional organizations - it's a great way to grow as an artist. I've been an associate member of the National Sculpture Society and I am happy that I was just juried into the Women Artists of the West. Luckily I've been trying to use my task-manager more and was able to remember to get my application in before the deadline, as they only jury in new members once a year!

It's nice getting in to these organizations, but I haven't yet been active. My next goal is to take full advantage of what they have to offer, enter their shows and contests and get more involved - time to make a move from 'associate' to 'full' member in every sense of the word.

Sculpting on "Ascension" went so well last night that I was loathe to stop and turn in at 1:30am. I admit that I've been noodling on her for far too long - it's hard to declare done ;-). My goal is to have her at the foundry this afternoon or tomorrow morning - with new photos posted!