Showing posts with label bronze pouring. Show all posts
Showing posts with label bronze pouring. Show all posts

Thursday, January 26, 2012

Metal Chasing of "Ascension"


The bronze has been poured then the metal shell smashed off. After it was sandblasted to clean off any lingering particles, they take the sculpture in and begin to weld the pieces back together. Then an artisan known as a metal chaser then works on
burnishing out the weld seams and any some imperfections that they find. Marker indicates areas that they will do some additional work.

 I spent a lot of time at the Base Shop selecting the base (Nordic Green Granite) and how the sculpture will work with the base. We are going to go with a two tier base so that there will be room for the turntable (then the sculpture will rotate smoothly)

The sculpture is looking beautiful and I've mapped out my patina ideas - so once the sculpture has been custom fit to the base and the chasing done - it will be time to patina and affix to the base!

Tuesday, January 24, 2012

First Bronze Pouring of "Ascension"


Today was the first pouring of bronze for "Ascension"!  The shells had been built up over the hollow wax sections over a period of time. The shells were then placed into the furnace and the wax was melted out - a process referred to as "lost wax".

Next they took special buckets and collected the molten bronze and poured the liquid metal into the now-hollow ceramic shells. Once the bronze cools, they break apart the ceramic shells using hammer and pneumatic tools. After removing the hard shells, the sprues are then cut off using plasma torches.

Once that is completed, the sections of bronze are cleaned up by sand-blasting the last bits of plaster shell residue.

Finally, after the pieces are cleaned up they are ready to be welded back together.

Tomorrow I'll post photos of the sculpt being metal-chased.