Jet lag and sculptures are not a good combination...

 Bummer.....I'm seriously exhausted, having just returned from Europe and having hubby and daughter sick. I picked up my little gymnast to pack her up for the auction at the Loveland Sculpture Invitational this weekend and dropped her.

While ceramic sculptures can be quite sturdy, this was a wicked drop. I wouldn't mind so much, but I was counting on donating her for the auction and I had just put had the sculpt mounted to this nice stone base. Well, I might be able to salvage the base for future use.

At least I didn't smash any others yet ;-)

I got the rest of them down to the show and will finish the final set-up tomorrow. Then I can post some photos of the booth at the show later.

Sculptures mounted to bases!

Today I picked up 7 sculpts from the base shop. Finishing touches and photography in the morning, then heading down to Loveland to set up for the big show. If you're in area, you might want to swing by Sculpture Depot for their Art & Education Extravaganza. Lots to do, see and learn!

After Italy...

left Lenno, Lake Como, Italy, probably a few pasta pounds heavier. Avoid was lovley and views more lovely! We rented a two bedroom apartment in Lenno and did a lot od walking and one full day of ferries between towns on the lake. Awe left a day early because we had scheduled our train too close for comfort with getting back to Zurich for our flight out.

good thing, as our travel day was not without problems. first problem is our complete lack of Italian! Second being our inexperience with trains. Long, long day...but back in Zurich. we'll see a bit of the city before catching our plane to Frnkfurt tomorrow and then back to Colorado.

looking forward to getting ready for the Loveland Sculpture Invitational show this week!

Enjoying the food in Italy

Left glorious Switzerland for Italy. We're in the Lake Como region. Sadly we've not been in any museums to see any sculptures. Since we don't speak Italian or know the region, getting around has been challenging. So we've concentrated on walking the beautiful alleyways and eating great food!

Also come to the conclusion that Mario Andetti was simply an average driver from Italy ;-)

European Vacation

I've been out od town we are one a long-awaited trip to Switzerland and will return just before the Loveland Sculpture Invitational show. The sculptures are all getting the bases made and will be ready when I return. I will be posting photos as soon as I get back...

Off to Switzerland!

My husband, daughter and I are enjoying a re ip to Switzerland & Italy for the next two weeks to celebrate our 50th birthdays, our daughter's 16th birthday & our 20th anniversary all in one year! Currently sitting I Frankfurt airport waiting for plane to Zurich...then off to interlaken tomorrow!

I did pull some verrrryy late nights getting the last two sculpts fired and all the Latinas done so that I could get them in for mounting the bases while I'm gone. Good thing, too, since I will be setting up at the Loveland Sculpture Invitational show only two a days after returning!

Wish I could have poste the new photos before we left, but
Completely out of time...

Small scale full figure gymanst in water based ceramic clay

 In order to help the clay firm up and dry out a bit - plus to make it easier for the sculpt to hold its own weight, I cut her up to hollow out more. Although I did use a small bit of newspaper to bulk out her core, I find that in sculpting and moving the position around, there areas can build up thick in some areas. Surprisingly, this one was pretty symmetrical.


I removed some more of the clay from the core and the pelvis region. Once the clay firmed up

more, I was able to reattach her and continue sculpting.

Today she was strong enough to remove from the prongs that had been supporting the weight and stand on her own. I am working on finalizing her now.

Small scale full figure gymanst in water based clay

Time to start a new sculpt. This one will be a gymnast. It's currently measuring close to 9" tall is being sculpted using ceramic paperclay (CT3).

I started this same sculpt a couple of days ago using Chestnut - a highly grogged terracotta clay. The first attempt sagged so much that she kept having the weight press down on her legs and squash them. The clay is stiff and I had trouble getting it to twist when I wanted to move her pose a bit.

So after a day of modeling, carving, adding and fighting with it, I smashed it up and returned it to the bag for use in another project another day. Then I immediately started her all over again in the ceramic paperclay. This is much lighter and holds its shape on such a small scale, so I'm glad that I scrapped the first. I got twice as far in half the time on the second attempt.

The sculpt has an 'exterior armature', profiled in Bruno Lucchesi's books. The Chestnut clay was heavy and kept pulling out of the two prongs that are holding her weight. The papercaly is holding up better, but it may still need an internal rod added to her leg from under the base after firing to support the weight - time will tell. This sculpt has tiny fingers, so I'm hoping that it holds up well to sculpting and firing because in dance any gymnastics, the finger attitude means so much.

You can also see the hollowing that is going on. I rough in the shapes and then as the piece starts to dry and firm up, I can cut of the rough arms and head and hollow out and reattach. I've already hollowed her head and put it back on. The one arm is in place, the other is still off and drying a bit to be more firm.

The legs are still clunky because I really need to mass there to support in the early stages. Then I'll start to refine and take the forms down.

Figure Sculpting Demo - young dancer in ceramic clay #8

After letting the sculpt sit overnight I came back to it with fresh eyes. Something had been bothering me and I finally came to the conclusion that the dress wasn't quite right. So I spent some time adding clay and changing the way that the fabric moved. That seemed to make a pleasing difference:

Figure Sculpting Demo - young dancer in ceramic clay #7

 Making progress on the sculpt and generally pleased with her. There are some areas that need a bit more refining. The lighting is rather harsh because I just grabbed some quick pix in the studio. .

When she's fully completed I will set up the photo lights and get better photos,

I really enjoyed sculpting her and have titled this piece:

"Her  first dress rehearsal"

This was my first sculpture of a child and I have to agree with other people - kids are challenging. I did not work from a model which can add to the challenge of a piece as I try to imagine limbs in the round. The thing with children is their softness. It makes it hard to find the forms sometimes.

 This was so enjoyable that I'm certain that I'll be doing more dancers and hopefully gymnasts too.

 I have hollowed out the second arm and attached it back onto her body. Then I fleshed her out a bit more and started to define her ears.

She needs to rest a bit and firm up more. Next I'll block in the hair mass and dress before heading back to start any refining.

It was quite fun to chop off her arms and move them around. I probably took them off and on about 5 times until I had both working in the direction that I was looking for. Really looking forward to the rest.

One thing I will say about paper clay is that it re-wets readily - sometimes a bit too easily and can become water-logged...but with a little time and the proper amount of circulation, you can get the firmness of the clay back to a workable consistency.

Arm placement and hand position make a difference

 I've re-attached one of the hollowed out arms. The hand is roughed into place. The new placement of the arm is more graceful and in tune with the attitude of the sculpt.

The whole body must be in agreement, or the figure will simply look wrong or awkward - so I often revise as I'm working and will change the placement of the body in order to better tell the story, emotion or intent.

 

What to do when you drop your head?

Start over, of course! Yep, after I reattached her head, I bumped the sculpture stand and tipped the figure precariously. Consequently her head dropped to the floor with a big plop! Naturally it did a real face-plant so there was no real salvaging her. Quite gruesome, actually ;-)

Oh well, I enjoyed sculpting her and felt she was a bit stilted in expression anyway.

So I sat down today and created a new head. I also worked on her arms by cutting them off and hollowing them out. Then I started to rough in her hands. I've decided to change the position of the arms a bit, making her a bit more expressive, too. Have I mentioned how much I love the second chances you get with clay?

Happily, the new head is in place, the body has firmed up better to support the weight and I have one arm and hand attached again. The battery on my camera needs charging so I don't have enough juice to get more photos in today....I'll photo and post the progress soon....in the mean time, I'm happy with the progress of the head and face and feel that the second sculpt is better than the first.

I'm planning on having this sculpt more 'painterly' in the finish so this will be a new challenge on to over-work the surface.

Stay tuned!

Figure Sculpting Demo - young dancer in ceramic clay #6

 Off with her head!

Yes, it does seem a bit brutal. However, there are several reasons to to mutilate your sculpture. In this case I wanted to hollow the head and neck more and I wanted to work on the face "off sculpt". 

By removing the head, I have easier access to the skull and the features ~ sometimes sculpting on the full form can be awkward and space limited, so by removing a piece from the overall sculpture, you can get to it easier.

I will sculpt more on the head and re-attach later. Ears and hair are sculpted later, since they would be squashed in handling anyway.
 

Figure Sculpting Demo - young dancer in ceramic clay #5

 No time to work on Monday and only an hour this morning...so not much change, but refined the form and the arms a bit. Later today I hope to have enough time to start her hands.

Then I may remover her head to make it easier to sculpt, be sure of my wall thickness and reattach - we'll see how far I can get....

Figure Sculpting Demo - young dancer in ceramic clay #4

Last post today. Would have preferred to go further, but hubby just got home and the last of my Studio Tour visitors recently left so will call it a night!

Having people come to the studio and sculpting in front of people was a fun experience! Though I didn't get as much sculpting in, as I stopped often to talk with people and show them around, I feel like I've got a good start to this sculpt. I'll let her firm up overnight and get back to work tomorrow. Plan on trying to have her done by the end of the week so check back to see her progress....

Thanks for visiting everyone - I had a great time at the tour and plan on doing it again next year. I think I'll book a model and try to compete a figure pose over the two days next year....

Figure Sculpting Demo - young dancer in ceramic clay #3

 Here is the progress - her arms have been attached. The clay is still quite wet. I would be further along, but as it's a studio tour, I stop working to meet with visitors to explain my work and methods ; -).

There is still 3 more hours of the tour, so I will continue to work and post photos the rest of the day - come on out to visit until 5pm today~

Figure Sculpting Demo - young dancer in ceramic clay #2

Here is the progress - I've continued to move the sticks around at the form takes shape. The clay continues to sag and slump and I am continually bringing it back up to it's original height.

Next I will begin forming the arms and putting into place.

Stop by today to see the progress in person - I'll be sculpting until 5pm today as part of the Fort Collins Studio Tour!

900 Marble Drive.

Figure Sculpting Demo - young dancer in ceramic clay

For the Fort Collins Studio Tour I'm doing a sculpting demo. I'll be sculpting a young dancer with an attitude using ceramic Paper Clay. Here I've just started. The armature is a steel pipe attached to a board. I've put newspaper around the steel post and wrapped that with a slab of clay. The stick are temporary supports - the clay is wet and heavy and slumps while at this stage. It will be a couple of hours before it's stiff enough to support the weight and the sticks will come out. Will be updating the sculpt all day as I progress.

Come on out toe 900 Marble Drive in Fort Collins today from 10am to 5pm to see the progress!

Fort Collins Studio Tour Today!

It's a beautiful day for the tour. Finishing up a few details before the 10 a.m. opening!