Showing posts with label gymnast. Show all posts
Showing posts with label gymnast. Show all posts

Wednesday, August 10, 2011

Jet lag and sculptures are not a good combination...

 Bummer.....I'm seriously exhausted, having just returned from Europe and having hubby and daughter sick. I picked up my little gymnast to pack her up for the auction at the Loveland Sculpture Invitational this weekend and dropped her.

While ceramic sculptures can be quite sturdy, this was a wicked drop. I wouldn't mind so much, but I was counting on donating her for the auction and I had just put had the sculpt mounted to this nice stone base. Well, I might be able to salvage the base for future use.

At least I didn't smash any others yet ;-)

I got the rest of them down to the show and will finish the final set-up tomorrow. Then I can post some photos of the booth at the show later.


Thursday, July 14, 2011

Small scale full figure gymanst in water based ceramic clay

 In order to help the clay firm up and dry out a bit - plus to make it easier for the sculpt to hold its own weight, I cut her up to hollow out more. Although I did use a small bit of newspaper to bulk out her core, I find that in sculpting and moving the position around, there areas can build up thick in some areas. Surprisingly, this one was pretty symmetrical.


I removed some more of the clay from the core and the pelvis region. Once the clay firmed up
more, I was able to reattach her and continue sculpting.

Today she was strong enough to remove from the prongs that had been supporting the weight and stand on her own. I am working on finalizing her now.

Tuesday, July 12, 2011

Small scale full figure gymanst in water based clay

Time to start a new sculpt. This one will be a gymnast. It's currently measuring close to 9" tall is being sculpted using ceramic paperclay (CT3).

I started this same sculpt a couple of days ago using Chestnut - a highly grogged terracotta clay. The first attempt sagged so much that she kept having the weight press down on her legs and squash them. The clay is stiff and I had trouble getting it to twist when I wanted to move her pose a bit.

So after a day of modeling, carving, adding and fighting with it, I smashed it up and returned it to the bag for use in another project another day. Then I immediately started her all over again in the ceramic paperclay. This is much lighter and holds its shape on such a small scale, so I'm glad that I scrapped the first. I got twice as far in half the time on the second attempt.

The sculpt has an 'exterior armature', profiled in Bruno Lucchesi's books. The Chestnut clay was heavy and kept pulling out of the two prongs that are holding her weight. The papercaly is holding up better, but it may still need an internal rod added to her leg from under the base after firing to support the weight - time will tell. This sculpt has tiny fingers, so I'm hoping that it holds up well to sculpting and firing because in dance any gymnastics, the finger attitude means so much.
You can also see the hollowing that is going on. I rough in the shapes and then as the piece starts to dry and firm up, I can cut of the rough arms and head and hollow out and reattach. I've already hollowed her head and put it back on. The one arm is in place, the other is still off and drying a bit to be more firm.

The legs are still clunky because I really need to mass there to support in the early stages. Then I'll start to refine and take the forms down.