At the Loveland Sculpture Invitational Show...

Sculpting is calming and freeing for me. So I brought my working in progress, "Ascension", to the show to give me something to do.

Thanks for Mr. Tom Carter for snapping a couple of pix while at my booth today!

"Ascension" is getting a nice reception from the patrons and I'm really excited about finishing her next week and taking her down to Art Castings of Loveland to start the bronze process.

In the mean time, I was happy to find a new home for "Hint of a Smile" today. She was purchased by a lovely lady from Texas. It was satisfying to see her pass my booth, pause and declare, "She's mine!" Makes one feel really good to have created something that she really connected with.

The show is amazing, of course I've known that from visiting it, but from an exhibitor's prospective, I can see that it is beautifully run and the volunteers are the best.

Looking forward to what tomorrow's show brings!

First wax pouring of miniature fox sculpture

This is my first time pouring wax in preparation for the lost wax bronze process. I have an old crockpot that I'm using to heat the wax. This wax is something I bought an embarrassingly long time ago and can't remember what kind it is. Karen, at Sculpture Depot, assured me that pretty much any wax will work and different kinds can be intermixed. I thought I'd be really smart and put the block of wax in an old metal can inside the cooker to keep the cooker from getting wax all over it. Nice idea, but it dripped and got wax it it anyway ;-)
I'm using the pour mold (commonly called a dump mold) that I made of my miniature fox (you can see on earlier posts). After melting the wax, I took a small cup, dipped it into the melted wax and poured into the mold. Then swirled the mold around and emptied the wax back into the pot. A layer of wax remained inside. I did this several times to build up layers.
1) crockpot with melted wax in can
2) wax in the mold (I tried tape to secure the mold but it didn't stick very well - rubber bands worked better)
3) the wax mold of the fox - it has flaws and the base would need to be trimmed.
4) I was anxious to see the wax and demolded too soon - the wax was still quite warm and broke.You can see how the swirling of the wax creates a hollow casting.
5) I figured it would take several tries to learn the process enough to get good results. Luckily I can simply melt down the rejects to reuse the wax.
6) Back into the pot for remelting. I tried again that night - but the wax wasn't hot enough so it was a tad lumpy. The results were another imperfect casting so will try again later.

Cast sculpture miniature fox

This is the final cast piece from the mold I made of my miniature fox. You can see the original oil-based clay sculpt on my December blog. The instructions and process of how I made the mold are in the previous post.

This was cast using Smooth-On's Smooth-Cast 300 liquid plastic.

This is an easy product that is mixes compounds A+B in equal amounts. The plastic cures in a matter of minutes to a very white plastic. It demolded from the silicone very easily.

The down side is that, well, it's PLASTIC. Not my favorite substance. But this is a learning process . I painted the plastic casting using acrylics to mimic dark stone and the results are fine. I should have done a little more clean-up to the lines where the mold joins together, but for a first try at casting, I thought it came out well.

I could also pour melted wax into this mold, clean up the wax and take it to bronze at some point. We'll see ;--)