Showing posts with label commission. Show all posts
Showing posts with label commission. Show all posts

Wednesday, December 9, 2015

Starting Bas Relief Medallion Commission




I received a commission to sculpt a bas relief medallion about 24" x 24". This sculpture will be cast in Forton or Aqua Resin.

To start, I scaled up my drawing and laid it out on a piece of hard foam.

Then I traced the shape out onto the foam board using a marker.
Next I used my hot wire tools to cut the foam away. This stuff is toxic so I was careful to work in the garage and wear a mask!

Once everything was cut out, I drew in some guidelines for the shapes and began carving away using a serrated knife.

When I had the basic forms started, I refined them using files, rasps and sandpaper to further define the medallion.

Finally I put on a coat of primer to seal it. This serves two purposes: to keep the crumbly bits out of the clay and to give an even 'tooth' for the clay to adhere.

I'll let this dry overnight and then I'll come back with some warm oil-based clay and begin sculpting over this armature foam.


Wednesday, July 24, 2013

Laying in some muscle mass - continuing the work on building the figure

 Sorry I skipped a step - I photographed the last of the skeleton but the photos didn't come out well enough to post. So here I have finished the simple skeleton and have progressed into laying in some of the major muscle masses.

As the finished sculpture is not an ecorche study, I am not concerned with making every muscle with attachments and origins. My goal is to lay in the shapes and forms of the muscles that most effect the surface.

I am using Chavant's Clayette in Hard for the skeleton and hands and Clayette Medium for the muscle mass. I will also use the hard for the face and hair as this is a small scale piece.

You'll notice that the hands look a bit big in the beginning. This is because there is little muscle - mostly bone and tendons in the hands and feet whereas the legs and arms have a lot of muscle and fat. When you strip the figure of a lot of the muscle and fat - the hands will look larger in proportion to the overall figure. As I flesh out the rest of the figure you'll see the hands and feet will look more normal with the larger forms of the legs, arms and body to balance things out.

My husband just walked by and wondered aloud if all this skeleton and muscle work was necessary and wouldn't it be easier and faster just to glob it on? Short answer - yes and no. Sometimes I do just jump straight to large masses (outer form of skin) and quickly set things up. But taking the long road (bones and muscles) does things for a piece of art that just can't be achieved any other way.

Wednesday, November 7, 2012

Ecorche' - Sculpting the muscles of the face


écor·ché

ey-kawr-shey  - noun
an anatomical model of part or all of the human body with the skin removed, to allow study of the underlying musculature.
******** 

 Anatomy....If you plan on sculpting the human figure then make no bones about it (....*groan*...pun intended ;-) you really need to know and understand anatomy.

It's a good idea to to try your hand at sculpting individual muscles in order to truly gain an understanding of what is happening under the skin. This exercise pays huge dividends when you sculpt because as you make the forms, you'll begin to understand how these bones, muscles and tendons give life, emotion and expression to your art.

This will infuse your work with greater authority and sculpting from life, or your imagination will become easier.

You can take workshops or classes if you have the time and availability, but if that isn't feasible, roll up your sleeves and get to work on your own.

Some books that I find useful for anatomy:

The Human Figure (David K. Rubins)
Classic Human Anatomy* (Valerie Winslow)
Anatomy for the Artist (Sarah Simblet)

*I especially like how this book is broken down and the phonetic help.





Thursday, July 26, 2012

Portrait sculpting demo - Daughter

I started a life-sized portrait bust of my daughter this week. Below you will see the progression of where I started and up to this point.

First, I began by by crumpling some newspaper into a ball shape and taping it over a post. Next I added a generous amount of CT3 waterbased clay to form a general starting head shape. Then I made some lines to dived the head into proportion.

After that I began to carve out the eye sockets and refine the head shape and then began blocking the forms of the features.

Once I got that far, I added shapes and continued to refine the shapes. Up until this point I wasn't too concerned with getting a likeness - it was all about forms, shapes and proportions.




Now that I've gotten this far, I will let the clay rest a bit, allowing it to firm up. Then I will go back and begin to seriously define the forms, correct any proportion errors that I find and begin honing the likeness.  This portrait is just of 1/2 completed and has used nearly 1 full bag (25lbs) of clay. I will probably need another 1/3 to 1/2 bag of clay to complete the bust.